Webcervices. Con la tecnología de Blogger.
RSS

Unete a nuestro grupo de facebook

Unete a nuestro grupo de facebook
Hola que tal lectores de esta pagina tan maravillosa que es arduino Tec ...Los invito a que amplíen mas sus conocimientos en Arduino y Raspberry Pi Uniéndose a mi grupo Arduino Tec

Multi proyectos 0092

FUNDACION ARTE Y DERECHO GRANTS AN ARDUINO PROJECT

dcuartielles – April 22nd, 2010

R3sist3ncias projection
(c) 2010 by Cristina Ghetti and Patricia Aragon
Two of the students I met during my spring course at the School of Fine Arts at Valencia Polytechnic University earlier this year, have just been granted by the Spanish Foundation “Fundacion Arte y Derecho” for their work developing:
[...] Interactive interfaces, using open source and cheap materials. Tactile interfaces of easy  usablity  and learning willing to be installed in multiple spaces for modifiyng their  carachteristics.
Tangu: Interactive multi user interface. in Phase of development, we had created three prototipes and contents using processing code
They can be placed either on floor or wall, creating different situations and types of interaction.can be re-utilized for multiple projects aiming to promote  multi- authorship  and work in progress
It might look like just another input system connected to Processing, but if you consider their smallest prototype has 59 inputs … things turn to be a little different. This post is just to congratulate Cristina and Patricia for their good work and persistence!

ARDUINO BASS SYNTH WITH ADDITIONAL CONTROLS [CODE READY]

Davide Gomba – April 21st, 2010
Thanks a twit of some days ago, I discovered this video by [neutron7]
Now there are 2 envelopes, LFO, random, and velocity modulators for the filter and the wavetable position and sync pitch.
This only has 32K of wavetables, instead of 256.
MIDI controls are temporary, it will have pots for everything.
current code (for 3 weeks)
http://codeviewer.org/view/code:d6d
sounds trippy good ;)

OPENMOCO [OPEN-SOURCE PHOTOGRAPHIC MOTION-CONTROL]

Davide Gomba – April 21st, 2010
[drone] about OpenMoco
It may not be obvious from the surface, but the project has really taken off.  If you pick up this month’s copy of Wired, the fetish photo was shot using the OpenMoco system, I have worked directly with that photographer to help him build a system based around OpenMoco to solve many of his studio needs.  Jay Burlage (of HDR and ‘milapse’ notoriety) joined me in the project a few months back, and has really helped increase the traction of the project with both pro and amateur shooters.
OpenMoco is one of the more complete solutions of DIY cinema/photography. A lot of informations can be found on the site (video after the break)

WEARABLES 'PING' CLOTHING LETS YOU BE CONNECTED TO THE WEB

Davide Gomba – April 21st, 2010
[Sean Hollister] speaks about the new upcoming phenomena of wearable computing on engadget.com
Arduino-powered clothing is nothing new; we’ve seen CO2-detecting dresses,compass belts and inbox-checking T-shirts all within the last six months. But this Ping social networking garment concept is not quite the same thing. Where those were DIY projects with a single-function, Ping is the brainchild of a professional UI designer… and the fabric itself is a social network UI that registers your movements as attempts to communicate. Woven with flexible sensors and conductive threads connected to an Arduino Lilypad and Xbee, clothing made from the fabric can detect when you lift a hood or tie a ribbon and wirelessly send Facebook status updates accordingly — or tap you on the shoulder in a number of different rhythms so you know not only when, but who might be trying to get in touch. Designer Jennifer Darmour imagines a future in which clothing offers full-body 3D gesture recognition and senses our environment. When we can reliably use it to control our computers, we hope she’ll get in touch.
but what does this cloth do?

ARDUINO JUST FOR BLOG CREDITS

dcuartielles – April 21st, 2010

Arduino just for Blog Credits
(c) 2010 by xkcd, Arduino just for Blog Credits

ARDUINO MULTIPLEXER TUTORIAL [ARDUINO AND PROCESSING CODE]

Davide Gomba – April 20th, 2010
Nice Multiplexing (not a standard 4051, but a 16 channel multiplexer) tutorial (video after the break)

BURN BOOTLOADER FOR ARDUINO DUEMILANOVE

Davide Gomba – April 20th, 2010
[James Wilson] knows how to play the game, and share with us a very useful guide using avrdude 5.10 (on Ubuntu 9.10).
This is using a new Arduino Duemilanove board with a regular Atmega328p, with no bootloader. I wanted to do the BitBang mode, since I didn’t want to get or make anything else, and the ArduinoISP, I didn’t have access to another Arduino. So I pieced together 3 different guides, I finally got it working.

ARDUINO-POWERED KINETIC SCULPTURE

Davide Gomba – April 20th, 2010
Nice Arduino-tentacles-based interactive installation going on in Toronto (video after the break)
Anthros is a project I began working on as my fourth-year university thesis project for New Media at Ryerson University (Toronto, Canada). It uses open source tech (OpenFrameworks, Arduino) to make large tentacle-like nodes follow a user through a space. It was shown at Meta 2010, our thesis project show, in Arta Gallery at the distillery district of Toronto.
The system is run off of a computer tucked away behind a wall. A webcam mounted on the ceiling above the piece is aimed down to see the field of people and tentacles. The computer processes this video stream using OpenFrameworks, ofxOpenCv, and the software written on top of these for managing tentacle positions and calculations. The computer then outputs the data via USB to an Arduino, which controls and updates a servo controller.
Wires run from the servo controller to each node, which includes two high-torque servo motors (x, y axes), which cause the node’s spine to bend in a particular direction, giving it movement. The skin is composed of a lightweight vinyl which has a skin-like texture to help keep the balance between the synthetic and the organic.?

BENDABLE, MUSICAL SHOES FOR NIKE, AND HOW THEY WERE MADE

Davide Gomba – April 19th, 2010
Photobucket
[Peter Krin], blogging at Create Digital Music, posted an interesting news about the new Nike+ campaign in Japan.
Apparently wishing to tout the bendable qualities of its new footwear, Nike enlisted sound artists to transform its product into a musical instrument. The shoes get plugged in, switched on, and mixed up, battle-style, as they sense when the shoe is flexed or moved in space. And yes, everything you see in the video is real: the shoes really are controlling digital sound live. We even have the Max patch to prove it.
[Peter], who wrote a article on MAKE Magazine Issue 8 about getting MIDI on different objects, interviewed Daito Manabe, a bleeding-edge sound artist and alternative interface guru with a background in turntablism.
I spoke to Daito, and convinced him to share the software that makes the project tick. Daito says he used flex sensors (see examples) and accelerometers to make the shoes interactive. He then processed the control signal and converted it to sound using the modular visual programming environmentMax/MSP and Ableton’s Max for Live.

ARDUINO COMPASS UNITY3D

Davide Gomba – April 19th, 2010
[beerking] is using a Devantech CMPS03 digital compass hooked up to an Arduino-compatible board to determine his movement in the room.
Wired a compass for my form seeeduino (Arduino-compatible) and connected via serial Unity3D proxy to control the rotation of the camera .. Jitter is me attempting to turn my deskchair

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

0 comentarios:

Publicar un comentario

Objetivo Y Reclamaciones

Este blog es un portal en el cual se publican contenidos de diferentes blogs.En los cuales se les anexa al pie de pagina un enlace a su pagina original aquí encontraran toda clase de proyectos de arduino y linux
Espero tengan una gran experiencia en este blog un Gran Saludo
de parte de la organización WebCervices..
objetivo
O del grupo ArduinoTec De arduino
Cualquier reclamación o petición comunicar al Administrador principal o hacer un comentario en la publicación que se sientan inconformes en los correos
electriarias@gmail.com
y para temas de suma importancia mi correo personal
pabioarias@hotmail.com

Siguenos en Twitter

Like

Unete a nuestro grupo de facebook

Hola que tal lectores de esta pagina tan maravillosa que es arduino Tec ...Los invito a que amplíen mas sus conocimientos en Arduino y Raspberry Pi Uniéndose a La mi grupo Arduino Tec

Unete Al Grupo De facebook

Unete Al Grupo De facebook
Amplia tus conocimientos debatiendo temas de Arduino y Raspberry pi